Precor RBK 885 Recumbent Bike (P84)

Shrouds are attached with minimal hardware and can be removed without taking off the pedals or cranks.

To achieve proper pedaling biomechanics, Precor designed the recumbent bike to maintain similar biomechanics as used on their upright bike. That means setting the angle of the seat rail with an offset from the crank to aide with efficient pedaling and reduced shear force on the knee. The seat rail angle is at 15 degrees with a slight offset from the crank axle. This places the knee directly over the ball of the foot (or pedal spindle) when the pedals are in the 2 and 8 o'clock position.

Two-step powder-coating process applies rust-resistant undercoat and cosmetic topcoat to steel frame.

The air flex seat back features a "floating" suspension system that allows the seat back to move with the user for unsurpassed comfort. The ergonomic curved design and ample ventilation further enhance user comfort. And the polypropylene material is virtually indestructible.

The bottom bracket assembly uses a hardened steel shaft with deep-groove sealed precision ball bearings designed for smooth operation and exceptional service life.

The simple, convenient seat adjustment allows the user to easily change the seat to their desired height, with one hand either on or off the bike.

The console handlebars help with entry and exit, while the riding handle bars provide optional hand and arm positioning and heart rate monitoring.

For double the convenience, dual-sided pedals allow the rider to use the pedals with or without the integrated pedal strap. The extra wide pedal comfortably accommodates feet of all sizes, which allows proper pedaling form with the foot directly over the user's knee.

The RBK 885 recumbent bike features a step-through design (14 in / 36 cm wide) with a very low step-over height (4 in / 10 cm).

The riding cockpit is designed with sound ergonomics. The seat pads are angled for optimal comfort, maximum low back support, and minimal interference with the movement of the user's legs. The console is mounted at an optimal viewing angle, with the machine controls within easy reach.

3-piece crank tightens positively, reducing the need for periodic adjustments. The 170 mm crank arm accepts any standard road or mountain bike pedal.

The two-stage drive system yields a smooth, comfortable, quiet operation with a lower start-up resistance and more consistent resistance progression than single-stage drive systems.

3-phase generator / eddy current resistance system requires no backup battery in order to efficiently power the bike.

Belt drive for smoother, quieter operation and reduced maintenance.

18 Readouts
Resistance Level,

Total Distance, Distance Remaining
Total Calories Burned, Calories/Min, Calories/Hr, Mets, Watts
Time Elapsed, Time Remaining, Time in Zone, Segment Time
RPM, Speed, Average Speed
Heart Rate, Average Heart Rate, Max Heart Rate

17 Programs
Lose Weight
4-3 Interval
Aerobic
Fat Burner
Heart Rate Zone
Be Fit
Manual
1-1 Interval
2-1 Interval
4-1 Interval
Rolling Hills
Mountain Peaks
Hill Climb
Heart Rate Zone
Push Performance
1-4 Interval
1-2 Interval
5 K
Heart Rate Zone
Watts Target

Yes. Touch heart rate sensors located conveniently on handlebars next to seat.

Yes. Integrated telemetry heart rate reads heart rate from a user's heart rate chest strap.

The heart rate features are intended for reference only. They may not be accurate for every user or at every speed and are not intended for use as a medical device. Holding the heart rate handle touch sensor while exercising at higher intensity may also decrease accuracy of the heart rate reading and is not recommended. Please also read the product documentation and our Freqently Asked Questions.

Ability to set club parameters, e.g. limit exercise time, set default language and pause time.

Applicable country-specific power cord