0

Your Cart is Empty

Precor

Precor Resolute Series Rear Delt / Pec Fly (RSL0505)

Description

SPECIFICATIONS

Warranty

Reviews

The Resolute Strength™ Rear Delt / Pec Fly features dual independent-movement arms that can each be set to 13 starting positions over a 120-degree range to accommodate a wide variety of exercisers and targeted training. The weight tower is offset to the right for most convenient access.

  • Accommodates two movements - rear delt and pec fly
  • Dual pivoting system for varying arm lengths
  • Independent arm movement promotes muscle balance

Equipment Features

Weight StackUnits have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
UpholsteryPremium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Adjustable SeatYes, gas-assisted ratcheting seat adjustment
AdjustmentsRatcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
Instructional PlacardEasy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.
Bearings and Pivot PointsOversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
Water Bottle and Accessories HolderThe drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
Pulleys and CablesGlass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg).
Frame and FinishThe frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat.
Bolt Down CapabilityYes
General FeaturesDual independent-movement arms feature upper pivots to accommodate arm lengths and can be set to 13 starting positions over a 120-degree range. Weight stack offset to user's right for the most convenient access.

Equipment Specifications

Standard Shroud ColorBlack
Incremental Add-on Weight5 lb (2.3 kg)
Weight Stack240 lb / 109 kg
Workout Area (L x W)82 L x 82 W inches / 208 L x 208 W cm
Standard Frame ColorsBlack Pearl; Gloss Metallic Silver
Stocked Upholstery ColorsAll Spice, Black, Grey
Additional Upholstery Options (Additional lead time applies)American Beauty, Blue Jay, Burgundy, Deep Clay, Hunter Green, Navy, New Purple, Regal Blue, Slate

Equipment Dimensions and Weight

Length56 inches / 142 cm
Width38 inches / 96 cm
Height84 inches / 213 cm
Equipment Weight583 lb / 265 kg

Shipping Dimensions and Weight

Shipping Weight642 lb / 292 kg

Regulatory

EN957Yes
ASTMYes
  • 10 years frame and welds
  • 5 years parts
  • 1 year surface finish
  • 6 months limited parts
  • 1 year labor

BIOMECHANICALLY SOUND

The movement arm handles of the Resolute Strength Chest Press can be angled to keep wrists in correct alignment as the exerciser's hands converge. Independent moving arms offer the option to target training to a single arm.

DESIGNED TO GO THE DISTANCE

The over-sized steel tubing of the Converging Chest Press contributes to a more durable product while also giving one of the most popular pieces of the Resolute line a timeless, contemporary silhouette. All the pivot and adjustment points are designed for quiet operation for years to come.

ADVANCED TRAINING

Strength training has gone digital. Add the Sony Advagym training and tracking system, along with the app, to give your exercisers a whole new way to train. Through the Advagym app, personal trainers can prescribe workouts and monitor their clients' progress.

You might also like

Why top fitness

Experts in fitness. Experts in equipment.

WHAT CUSTOMERS SAY

Brian was charming and very knowledgeable. The True treadmills are excellent and last forever- I'm only buying a new one because the old one is 24 years old and has limited features. It still works though!

Jodie R.

This store has the high end equipment that lasts, and the staff is very helpful in fitting the equipment with your needs. They are very friendly and not pushy to make the sale.

Frank D.

Brian did a great job helping me find what I needed. Would certainly purchase from Top Fitness again. Great overall experience!

Daniel S.

Your nearest store

2201 Preston Rd

TX 75093

Phone

Monday - Friday 10:00am - 7:30pm

Saturday 10:00am - 6:00pm

Sunday 02:00pm - 5:00pm

Not your store? See all stores

0